Servo Set Pulse

Configure the specified pin as analog output, set the period to 20 ms, and set the pulse width to the specified value.

pins.servoSetPulse(AnalogPin.P1, 1500)

Parameters

• name: a string that specifies the pin to configure (P0 through P4, or P10)
• micros: a number that specifies the analog period in microseconds.

Example

The following code sets the servo pulse to 1000 microseconds.

pins.servoSetPulse(AnalogPin.P0, 1000)

See also

board pins, on pin pressed, analog read pin, digital read pin, digital write pin

Brief Guide to Servos